Auto Infinite Scroll changelog

SEO-friendly infinite scroll that keeps your place on the back button

Latest version1.70
Released22 July 2026
Tested up toWordPress 5.8.2
Product page
What Auto Infinite Scroll does, what it costs and who it is for.
Knowledge base
Setup guides, how-tos and troubleshooting for Auto Infinite Scroll.
Discord support
Ask a question in the Auto Infinite Scroll channel and get an answer from Dave.
Downloads & licence
Grab the latest build or check your licence and renewal status.

1.7022 July 2026

  • Fixed the second load more button being permanently on - unchecking "Enable second load more button" had no effect because an empty saved value was being forced back to "on", so shops auto-fetched large batches (10 pages by default) and effectively loaded everything. It now honours the setting.
  • Fixed the load more button appearing at page 0 when the second button is disabled - it now auto-loads the configured number of pages first, then shows the button, and repeats every X pages, so visitors can stop and reach the footer.

1.6920 July 2026

  • Updated super-speedy-settings to the latest version

1.6818 July 2026

  • Updated super-speedy-settings to the latest version

1.6713 July 2026

  • Auto Infinite Scroll has prep work for MCP compatibility once the MCP Adapter from wp.org is stable and doesn't break wp-admin with their WP_CLI stub (controller/abilities code was going in super-speedy-settings, reverted for now)

1.6610 July 2026

  • Updated super-speedy-settings refreshed the Super Speedy settings page with new plugin and service-panel icons (shared across all Super Speedy plugins).

1.6510 July 2026

  • Updated super-speedy-settings (shared across all Super Speedy plugins): re-enabled TLS certificate verification on the licence/update check, escaped all dynamic output in the admin licence table, and added a capability check to the licence recheck handler.

1.6420 May 2026

  • Updated the Super Speedy Settings page: added a "Recheck Licenses" button above the licence table so customers have a clear way to refresh licence status after a renewal or upgrade without scrolling down to the licence-key field. The button is disabled until a licence key is entered/saved and re-enables as you type.
  • The Recheck flow now also force-bypasses the auth-server's own 1-hour licence cache (via a force=1 flag on the wpiapi/check_product_key call), so renewals/upgrades that completed less than an hour before a recheck no longer show as expired/exceeded. Normal admin page loads continue to use both caches as before — only an explicit Recheck click bypasses them. (Lives in the super-speedy-settings submodule, so the change propagates to every Super Speedy plugin.)

1.6313 March 2026

  • Fixed Woo Variation Swatches not initializing on products restored via magic back button history
  • Fire third-party plugin re-initialization events after restoring archive from local storage

1.6218 November 2025

  • Added full namespacing for plugin update checker to prevent conflicts with 3rd party plugins

1.6115 May 2025

  • Improved magic back button technology so that it definitely only runs on back button as it was confusing when clicking fresh to the archive and it was scrolling down whereas this is natural for the back button

1.6027 March 2025

  • Added JS trigger to invoke the Woo Variation Swatches Pro code after infinite scroll adds products

1.5918th Feburary 2025

  • Fixed admin screen so you can set the Load More button to appear after 0 pages - this means the load more button can be configured to appear immediately

1.5827 November 2024

  • Fix for new settings to clear the local transient cache when the license key is changed
  • Added a new 'recheck now' button on the license key page for when users renew or upgrade

1.5726 November 2024

  • Updated to use new version of license checker
  • Moved settings page to under the Super Speedy menu slug
  • Added link to settings page in plugins list

1.5623 July 2024

  • Updated JS for license checker - it had been affecting wp-admin overlays which heavily use JS to manipulate the DOM

1.5511 July 2024

  • Fixed warning on plugins page caused by new settings upgrade
  • Added better messaging for invalid, expired and exceeded licenses

1.5410 July 2024

  • Hotfix for settings upgrade from yesterday

1.539 July 2024

  • Updated license checker to use new faster version

1.5231 May 2024

  • Removed an old reference to jquery-ui
  • Removed use of the switchButton which seems broken, using regular checkboxes

1.5118 January 2024

  • Added !important CSS for loading spinner to get past some aggressive theme CSS

1.5018 January 2024

  • Version bump to invalidate zip cache

1.4818 January 2024

  • Updated loading spinner and load more button to ensure they load AFTER the identified container
  • this stops the spinner turning massive like can happen on some sites using the flex grid css

1.4720 December 2023

  • Improved defaults to work automatically on more themes
  • Added some new pagination options
  • choose how many pages to scroll before load more button appears
  • second load more button option after a different number of pages, e.g. default load 3 pages, show load more, then load 10 pages, then show load more ad infinitum
  • scroll to infinity checkbox option will prevent the load more buttons appearing more than once
  • Fixed bug related to removal of load more button for some themes
  • was leaving an empty item in themes which use CSS grid display

1.4621 November 2023

  • Updated plugin updater to look at superspeedyplugins.com

1.4521 November 2023

  • Fixed bug in API checker, it was not caching one type of result
  • Removed some JS console debug code

1.4420 October 2023

  • Added 2 hour transient cache for reading changelog files from our server
  • this will speed up wp-admin slightly and prevent the 403 forbidden error messages some have been getting when trying to run plugin updates

1.4313 October 2023

  • Hotfix for the append mode - one of the selectors did not append properly with the comma

1.4213 October 2023

  • Fix for previous update so that replace properly performs the replace command - it previously had a preceding comma which breaks jQuery

1.4113 October 2023

  • Added option to allow users to REPLACE our css selectors rather than the new default of appending to our CSS
  • this allows you total control over the selectors for each area
  • we append entries to our config by default since this is most commonly helpful for most users where they only need to add an extra post type or something for inf scroll

1.409 October 2023

  • Removed previous selector box since its unused
  • Updated text for page selectors to describe contents better

1.399 October 2023

  • Hotfix - items filter was not quite working
  • fixed that and streamlines JS a little

1.389 October 2023

  • Added new Items Filter for cases where your grids/archives have other items within them
  • can normally be left blank, or you can configure it to filter to only certain items within the parent wrapper
  • Updated config so that if you add CSS to the config screen then this appends to the default config
  • this makes it far easier to adjust config to just add the extra css required

1.3712 September 2023

  • Updated updates system to match spro, ssf, sss

1.3610 August 2023

  • Hotfix for new updates system - if your server was configured to disable remote URL requests, a critical error was happening upon upgrade. This has been fixed with a warning message that you cannot check for updates.

1.354 August 2023

  • Upgraded main settings page to show changes since last update
  • added update count to menu to help users notice
  • Added links to all plugin docs and support areas in the settings page

1.34 Beta26 July 2023

  • Upgraded updates sytem so it uses JSON and gets zip file from license-key-checked URL

1.3324 November 2022

  • Further fix for FRONT-END orders in my-account and any other area too - if the wrapper is not present, the code will not run

1.3224 November 2022

  • Fix for new orders screen with one client who was finding front-end scripts were loading there - this fix prevents AIS running in those cases

1.3117 December 2021

  • Migrated to use bitbucket for plugin updates

1.3017 December 2021

  • Hardened plugin update checker to prevent crash when checking for updates if WPI site not available

1.293 September 2021

  • Added additional default CSS to help auto inf perform on search results pages

1.2827 August 2021

  • Altered spinner to use pure CSS spinner similar to the YouTube spinner
  • Added Load More button text config (could previously alter this using locotranslate, now you can edit in settings)
  • Alter Load More button to use <button>More</button> instead of <a href="#"> - attempting to do this to get the button to use the themes styling

1.2726 August 2021

  • Altered JS to avoid running multiple times on pages that modify the pages - e.g. advert managers or other plugins. This fixes a rare screen freeze happening with certain themes/plugins.

1.2626 July 2021

  • Fixed CSS for More button to be auto-width

1.2526 July 2021

  • Removed 'More' text from CSS, moved it to internationalisation version using 'auto-infinite-scroll' domain

1.241 June 2021

  • Modification to history.js to prevent warning message which makes it now compatible with Oxygen builder

1.2325 May 2021

  • Minor modification to default CSS selectors for which items to ajax load

1.2220 May 2021

  • Fixed bug preventing auto infinite scroll from working on non-product archives

1.213 February 2021

  • Added MORE button on every 3rd page, this is best practice to allow the footer to be visible

1.2030 September 2020

  • Added new WPI Settings page where users can enter their license key to enable plugin updates

1.1927 August 2019

  • Added multisite compatibility
  • Improved import of required scripts and styles so that they use the plugins_url function rather than guessing at the URL based on 'current url' which could cause problems with domain mapper plugins

1.186 February 2019

  • Fixed auto updates - previously they were checking http rather thna https

1.1710 January 2019

  • Improved performance by avoiding loading any scripts on non-archive pages
  • Fixed issue with some themes where auto infinite scroll would kick in on 'related products' and other woo shortcodes

1.1623 December 2018

  • Added 'refresh' check to wipe the local storage for the archive to allow new products to be viewed

1.1519 December 2018

  • Improved theme compatibility and fixed back button issues

1.1431 January 2018

  • Fixed jQuery so that regardless of how many jQueries your theme loads, auto infinite scroll will still work
  • Improved theme compatibility - should work on all themes now

1.1231 January 2018

  • Fixed back-button behaviour so it works properly with customised products and pagination CSS wrappers - this fixes behaviour where page 1 would be reloaded after scrolling down after using back button

1.1131 January 2018

  • Removed unused options for minor PHP speed-boost

1.107 January 2018

  • Fixed custom loader icon, both default icon and any customisation
  • Fixed 'load X pixels from end' so now it can be customised

1.097 January 2018

  • Fixed jQuery conflict with some themes/plugins where 2nd version of jQuery was imported

1.0818 December 2017

  • Fixed JS bug on some browsers and some themes to do with order of loading scripts

1.065 December 2017

  • Added trigger to ajax completion of scroll

Back to recent releases

▲
▼
1/1